Model Bridges for the Garden Railway

Photo 3 Grockle Creek Pony Truss copy
Plate Girder  ELM TREE RED3

Please be patient.

Our photos can sometimes
 take a few moments to appear.



Through Lattice Bridge

The Through Lattice Bridge has been developed from our plate girder design and represents a style which would look very much at home on any rural railway in the UK. Although the lattice design is perhaps the most common we may be able to offer other patterns in the future. A Deck Lattice Bridge will also be available with the lattice structure below the deck. This design allows the addition of a parapet rail either side of the track deck.
As with most of our bridges this model is aimed at the British narrow gauge scene and is distinctly freelance in design. It is not a representation of a particular bridge either full size or miniature. However, the model is highly suited for the outdoor line in a range of gauges and scales, SM32, 0 Gauge, Gauge 1, G Scale and possibly larger. The structure is certainly capable of taking a substantial load and the width is quite generous. The Through Panel Bridge is a more sturdy structure than the simpler Under Beam Bridge.


The side panels are constructed of perforated aluminium in an anodised silver finish. They are held in a sturdy frame of T section aluminium.

A range of aluminium cross sections are used with joints connected by 2.5mm stainless steel bolts and aluminium blind rivets.

  • Side panels: 1mm plate
  • Top & Bottom Girder Beams: 25mm x 25mm 'T' section
  • External Stiffeners: 9mm x 9mm channel
  • Internal Stiffeners: 12mm x 12mm angle
  • Cross Beams: 16mm x 16mm channel
  • Longitudinal Track Supports: 25mm x 3mm bar
    • Dimensions


      • Length: 510mm
      • External width: 240mm
      • Internal width: 175mm
      • Overall height: 70mm
      • Internal clearance:180mm
        • PRICE: £121.00 plus p&p 


          • Length: 760mm
          • External width: 240mm
          • Internal width: 175mm
          • Overall height: 70mm
          • Upright spacing:180mm
            • PRICE: £173.00 plus p&p

              • Length: 1000mm
              • External width: 240mm
              • Internal width: 175mm
              • Overall height: 70mm
              • Clearance between side panels:180mm

                  PRICE: £227.00 plus p&p
                  The bridge is individually made by hand. It is supplied in its bare metal state and can be left to weather naturally or you can prime and paint it. Note we don't supply it highly polished! It bears minor scratches and scuffs from the process of construction which certainly do not detract from the appearance of the bridge. We do endeavour to present the lattice panel unmarked.
                  Longitudinal plates are placed at a suitable distance to support 32mm and 45mm gauge track. The bridge does not include any decking but you could easily add your own wooden planking or a zinc diamond pattern grid. The length of the bridge allows it to be supported by the end 10-20mm of the beams.
                  At the shortest length the bridge is sufficiently strong without bracing however longer bridges of this type will incorporate both diagonal bracing below track level.
                  The bridge is supplied fully constructed as shown in the photos. Obviously the rolling stock and track are shown for scale purposes only and are not included.
                  The width can be varied to suit the smaller Mamod size rolling stock or increased to provide a double track (additional 35% cost).


You are viewing the text version of this site.

To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.

Need help? check the requirements page.

Get Flash Player